Hello everyone,
I'm the sad owner of such a tablet, sad because it died on me after a few hours of use and I can't revive it no matter how I tried.
The tablet was boxed as a Superpad III with x220, 512 Ram, 4gb internal store, 1 sd slot, 2 full size USB ports, 1024x600 resistive touch panel 10" screen.
As it crashed on me without warning I don't know the SW version, so I don't know which firmware I should use to update it! The Chinese seller disappeared on me so I can't get the firmware from them.
I took it apart to see if I can get any clues on it but I'm not closer to getting it to work. The main board says WWE101-MAIN ver. 3.4 2010/10/19.
I've flashed tons of various roms, including the ones mentioned here, using both Sd and USB cables, but none worked. I know I need to replace all the files. I need the uboot.img the uboot-nand.bin along with the usual things like ramdisk kernel system recovery, but I don't know which one.
When I use the USB cable something strange happens. Interestingly the iuw utility doesn't let me flash all images, but only the U0 and the kernel succeeds, when I try for the system.img it always fails no matter which ROM I tried. If I use the sd card the same files flash properly. The iuw gives me a Chinese error message that contains uboot in it.
No matter what I tried it could not get away from the boot logo. I can flash several uboot versions to get different boot versions displayed and seen the nand flash countless times. If I could get it to move on and actually start booting the kernel I'm sure I could have it up but I need help now! Please if anyone nows how to move on and at least identify what firmware I should be looking at write me! I know I'm not the only one with this problem.
I'm getting desperate, having spent long nights trying to get it working. Can anyone help?
Sent from my GT-I9001 using Tapatalk
I'm the sad owner of such a tablet, sad because it died on me after a few hours of use and I can't revive it no matter how I tried.
The tablet was boxed as a Superpad III with x220, 512 Ram, 4gb internal store, 1 sd slot, 2 full size USB ports, 1024x600 resistive touch panel 10" screen.
As it crashed on me without warning I don't know the SW version, so I don't know which firmware I should use to update it! The Chinese seller disappeared on me so I can't get the firmware from them.
I took it apart to see if I can get any clues on it but I'm not closer to getting it to work. The main board says WWE101-MAIN ver. 3.4 2010/10/19.
I've flashed tons of various roms, including the ones mentioned here, using both Sd and USB cables, but none worked. I know I need to replace all the files. I need the uboot.img the uboot-nand.bin along with the usual things like ramdisk kernel system recovery, but I don't know which one.
When I use the USB cable something strange happens. Interestingly the iuw utility doesn't let me flash all images, but only the U0 and the kernel succeeds, when I try for the system.img it always fails no matter which ROM I tried. If I use the sd card the same files flash properly. The iuw gives me a Chinese error message that contains uboot in it.
No matter what I tried it could not get away from the boot logo. I can flash several uboot versions to get different boot versions displayed and seen the nand flash countless times. If I could get it to move on and actually start booting the kernel I'm sure I could have it up but I need help now! Please if anyone nows how to move on and at least identify what firmware I should be looking at write me! I know I'm not the only one with this problem.
I'm getting desperate, having spent long nights trying to get it working. Can anyone help?
Sent from my GT-I9001 using Tapatalk