For who found it useful, found probable model / supplier of boards models MID x024

B

bitmask

Member
Jun 12, 2011
2
1
Searching for clues on low level developing for Corby Kyros MID 7024/8024 devices I found the board supplier BoardCon Embedded Design have the S5PV210 MID board in MID and Laptop Products section.

The board I/O physical sequence are exact the same on Kyros MID 7024/8024, also as the config specs for video resolutions and internal RAM/ROM.

Samsung Cortex-A8 S5PC210 MID BOARDCON

Hope any can find this info useful and help developers around port Honeycomb to Kyros MID devices :)
 
bitmask said:
Hope any can find this info useful and help developers around port Honeycomb to Kyros MID devices :)
Click to expand...
This board is not exactly it. Look at the location of the external ports and you'll see the discrepancy with the real 7024/8024 (the hdmi/reset and 3.5 jack are swapped). Plus the specs for the rider board do not match up.
It might be an earlier/later revision of the board used for the 7024, but not an exact match.

If you eyeball the rider board this is what you'd find:
* NAND Flash - Samsung K9F1G08U0B-PCB0 (128Mb)
* DDR2 SRAM 4x Samsung K4T1G164QF bce7 (1 G DDR2-800 5-5-5)
* SoX Samsung S5PV210 AH-A0 N30XUOC

Datasheet PDFs for each are available on the Samsung site.
 
Last edited:
If you eyeball the rider board this is what you'd find:
* NAND Flash - Samsung K9F1G08U0B-PCB0 (128Mb)
* DDR2 SRAM 4x Samsung K4T1G164QF bce7 (1 G DDR2-800 5-5-5)
* SoX Samsung S5PV210 AH-A0 N30XUOC
Click to expand...

Parts brand/numbers are dependent of the production stock or strict request by buyer (I worked on an assembler industry).

From BoardCon:
  • CPU: Samsung S5PV210/S5PC100
  • Operation system: Google ANDRIOD2.1/2.2
  • Memory: DDR2 256MB, 512MB optional (seems Coby opted for 512MB)
  • Storage Device: 2GB NAND Flash , 4GB/8GB/16GB optional (seems Coby opted for 4GB)
  • LCD Size: 7Inch TFT LCD, 8”/10” Optional (7":7024, 8":8024, 10":1024)
  • Resolutions: 800x480, 800x600 and 1024x600 (again 7024, 8024, 1024)
  • Touch Screen: Resister Touch Screen, Capacitive multiple-touch screen ([7/8]024 resistive, 1024 capacitive)
  • G-Sensor: Supports LCD rotating, 3D games
  • 3G moudule: Evdo, WCDMA,TD-SCDMA and CDMA2000 (not present)
  • HDMI: HDMI v1.3 720p/1080p @30fps
  • I/O ports: Mini USB.2.0., T-FLASH, 3.5mm headphone, build-in michophone

Page 5 of 20101101144058475.pdf (the link on the above page), have a nice look on the physical disposition of the connectors and its near 1:1. Reviews on board are not discarded, but its close to the used on Coby and on major of "generic Samsung S5PC210" tablets. I found others boards vendor but BoardCon is the most close to the Coby

Perhaps we having a misunderstood case, my intention is not say it is the same board, but the most similar possible (including the connectors) and have all the same features Kyros have, so a choice for developer find a suitable version of System/Kernel/Drivers for help developing
 
Last edited:
bitmask said:
I found others boards vendor but BoardCon is the most close to the Coby
Click to expand...
Did you look at urbetter? Their name tag is sprinkled all over the build.props.
I've heard they are the makers of Herotab C8/Dropad A8, a tablet with the closest matching specs to Coby.
 
You must log in or register to reply here.
Back
Top