MID9740 possible fstab problem

[bryancartwright]

Welcome to day 4 of my Kyrosall headache. I found my MID9740 on Craigslist for $15.00. I am fairly proficient with android and laughed when the seller claimed the tablet was bricked. I repair bricks more often than a mason... Until the Coby Kyros...
Now, 4 days later I am ready to retire my SuperUser cape and sit at the noob table.
I now submit my recovery.log to this forum and pray that the Gods like Vampirefo and Traveler 1701 may take pity.

*Issue- Obviously I have no dump. The tab was stuck on Coby logo, and has never booted past that. I was able to replace stock recovery with cwm and get adb up and running. The partitions on this thing seem wrong to me. I can only mount when external sdcard is in. I am unable to mount my /data file, I can format it with Clockwork but it takes about 5 minutes. Here is the output of recovery.log.

Starting recovery on Fri Jan 1 03:56:59 2010
framebuffer: fd 4 (1024 x 768)
CWM-based Recovery v6.0.2.8 9740 by Vampirefo
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/nandc (null) 0
2 /system ext4 /dev/block/nandd (null) 0
3 /data ext4 /dev/block/nande (null) 0
4 /misc emmc /dev/block/nandf (null) 0
5 /recovery emmc /dev/block/nandg (null) 0
6 /cache ext4 /dev/block/nandh (null) 0
7 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/nandk 0


W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"


ro.serialno=
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=sun4i
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JZO54K
ro.build.display.id=full_9740-eng 4.1.2 JZO54K eng.vampirefo.20130521.020547 test-keys
ro.build.version.incremental=eng.vampirefo.20130521.020547
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Tue May 21 02:06:30 EDT 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=vampirefo
ro.build.host=vampirefo-GA-MA78GM-US2H
ro.build.tags=test-keys
ro.product.model=Full Android on Emulator
ro.product.brand=Android
ro.product.name=full_9740
ro.product.device=9740
ro.product.board=9740
ro.product.cpu.abi=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=unknown
ro.build.product=9740
ro.build.description=full_9740-eng 4.1.2 JZO54K eng.vampirefo.20130521.020547 test-keys
ro.build.fingerprint=Android/full_9740/9740:4.1.2/JZO54K/eng.vampirefo.20130521.020547:eng/test-keys
ro.build.characteristics=default
ro.cm.device=9740
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.kernel.android.checkjni=1
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
​

I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
W:Can't unlink /cache/recovery/command​

and mount

mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/nandh on /cache type ext4 (ro,nodev,noatime,nodiratime,user_xattr,bar
rier=1,data=ordered)​

Please let me know what else you may need.

 

[vampirefo.]

Your log shows problem with you cache format the cache, what happens when you do a factory reset?

reboot recovery

mount /system
mount /cache
mount /data

try to mount them anyway

then

adb shell

busybox df -h

post output

you are going to need to dump the bootloader, boot.img and system also.

 

[bryancartwright]

ADB command reboot recovery has never worked, if that clue helps. I reloaded everything again this morning using one of your tutorials,[h=1]How to Restore 7042, 8042, 9742 and your dumps. /Data still refuses to mount. Here is my output.[/h]
~ # busybox df -h
busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 407.1M 48.0K 407.1M 0% /dev
/dev/block/nandh 503.9M 8.4M 495.6M 2% /cache

 

[vampirefo.]

reboot recovery wont work

reboot-recovery

you can't mount /system?

 

[bryancartwright]

Here is my output for the dumps.

\~ # cd /system/bin
\cd /system/bin
/system/bin # dump_image boot /sdcard/boot.img
dump_image boot /sdcard/boot.img
unable to detect device type/system/bin # dump_image recovery /sdcard/recovery.i
mg
dump_image recovery /sdcard/recovery.img
unable to detect device type/system/bin #
​

I am able to mount /system. I can reboot recovery with hard buttons, just not with ADB commands. Boots to COBY logo for 7 seconds, flash black, reboot to COBY logo... HANG...

 

[vampirefo.]

Here is my output for the dumps.

\~ # cd /system/bin
\cd /system/bin
/system/bin # dump_image boot /sdcard/boot.img
dump_image boot /sdcard/boot.img
unable to detect device type/system/bin # dump_image recovery /sdcard/recovery.i
mg
dump_image recovery /sdcard/recovery.img
unable to detect device type/system/bin #
​

I am able to mount /system. I can reboot recovery with hard buttons, just not with ADB commands. Boots to COBY logo for 7 seconds, flash black, reboot to COBY logo... HANG...

I have no ideal what you are doing none of the above makes any sense to me.

and if can mount /system why isn't in listed in your busybox df -h output?

 

[bryancartwright]

Good point. Sorry, long night. Let's start over.

busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 407.1M 48.0K 407.1M 0% /dev
/dev/block/nandh 503.9M 8.4M 495.6M 2% /cache
/dev/block/nandd 252.0M 4.1M 247.8M 2% /system
/dev/block/mmcblk0p1 6.9G 471.6M 6.4G 7% /sdcard
​

A mismount...

 

[vampirefo.]

You have to mount /system and /sdcard first. Format cache

busybox tar -cvzf /sdcard/9740_system.tgz /system

cat /dev/block/nandc > /sdcard/boot.img
cat /dev/block/nanda > /sdcard/bootloader.img

 

[bryancartwright]

~ # busybox tar -cvzf /sdcard/9740_system.tgz /system format cache
busybox tar -cvzf /sdcard/9740_system.tgz /system format cache
tar: removing leading '/' from member names
system/
system/lost+found/
tar: format: No such file or directory
cache/
cache/lost+found/
tar: cache/recovery: I/O error
tar: error exit delayed from previous errors

 

[bryancartwright]

Running the command busybox tar -C /system/ -zxvf /sdcard/system.tgz gave me the following.

system/
tar: can't make dir system: Read-only file system
system/app/
tar: can't create directory 'system': Read-only file system
tar: can't make dir system/app: No such file or directory
system/app/ApplicationsProvider.apk
tar: can't create directory 'system/': Read-only file system
tar: can't open 'system/': Is a directory
tar: write: Broken pipe

 

[vampirefo.]

Don't add format cache to command some how while posting command that got put in wrong place.

Sent from my SPH-D710 Android Phone

 

[bryancartwright]

I had kind of figured that, but not one to argue. I had tried it both ways though, same results. I realized that the 9740_system.tgz I had copied to my sd was only 1kb so I redownloaded and recopied but my /system folder appears to be stuck in write only.

~ # mount -o remount rw /system
mount -o remount rw /system
~ # mkdir /system/test
mkdir /system/test
mkdir: can't create directory '/system/test': Read-only file system
​

 

[vampirefo.]

Your problem is data partition is not being created, two causes I can think of.
1. corrupt internal memory
2. livesuite was used on tablet with wrong image.

You could set up micro sdcard and run system and data from micro sdcard
You can build your own livesuite image, if you are going this route use dumps that are already uploaded your most likely isn't any good.

Sent from my IdeaTabA2109A ICS Android Tablet

 

[vampirefo.]

I had kind of figured that, but not one to argue. I had tried it both ways though, same results. I realized that the 9740_system.tgz I had copied to my sd was only 1kb so I redownloaded and recopied but my /system folder appears to be stuck in write only.

~ # mount -o remount rw /system
mount -o remount rw /system
~ # mkdir /system/test
mkdir /system/test
mkdir: can't create directory '/system/test': Read-only file system

What did you expect to happen with this command?
If you use recovery to mount system it is writeable the command you are try to use is to be used in regular OS not recovery mode.
Also the 1kb system explains why busybox couldn't tar system it's empty.
Sent from my IdeaTabA2109A ICS Android Tablet

 

[bryancartwright]

If it is supposed to be writeable why can't I write to it. It says it is Read Only. And I have no idea why every time I ran busybox tar -cvzf /sdcard/9740_system.tgz /system ​it insisted on turning my 136mb system.tgz file into a 1kb system.tgz but I was finally able to get the system block filled in correctly. Still have had no luck with the /data though.

<5>[ 0.000000] Linux version 3.0.8+ (liyu@androidSRV) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #10 PREEMPT Wed Jan 9 18:11:31 CST 2013
<7>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<7>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<7>[ 0.000000] Machine: sun4i
<6>[ 0.000000] Total Detected Memory: 1024MB with 2 banks
<6>[ 0.000000] Memory Reserved(in bytes):
<6>[ 0.000000] LCD: 0x5a000000, 0x02000000
<6>[ 0.000000] SYS: 0x43000000, 0x00010000
<6>[ 0.000000] G2D: 0x58000000, 0x01000000
<6>[ 0.000000] VE : 0x44000000, 0x05000000
<6>[ 0.000000] VE : 0x49000000, 0x01000000
<7>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 245760
<7>[ 0.000000] free_area_init_node: node 0, pgdat c07ba520, node_mem_map c11c4000
<7>[ 0.000000] Normal zone: 1280 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 146176 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 768 pages used for memmap
<7>[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<7>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=8
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 448MB 512MB = 960MB total
<5>[ 0.000000] Memory: 831840k/831840k available, 151200k reserved, 393216K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
<5>[ 0.000000] .text : 0xc002f000 - 0xc07728cc (7439 kB)
<5>[ 0.000000] .data : 0xc0774000 - 0xc07c4820 ( 323 kB)
<5>[ 0.000000] .bss : 0xc07c4844 - 0xc0980038 (1774 kB)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] NR_IRQS:96 nr_irqs:96 96
<6>[ 0.000000] timer0: Periodic Mode
<7>[ 0.000000] sw_timer_init,line:408
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<7>[ 0.000000] aw_clksrc_init, line:338
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000101] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
<6>[ 0.040021] pid_max: default: 32768 minimum: 301
<6>[ 0.040150] Mount-cache hash table entries: 512
<6>[ 0.040436] CPU: Testing write buffer coherency: ok
<6>[ 0.040621] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>[ 0.041076] devtmpfs: initialized
<6>[ 0.042314] print_constraints: dummy:
<6>[ 0.042448] NET: Registered protocol family 16
<6>[ 0.042987] hw-breakpoint: debug architecture 0x4 unsupported.
<7>[ 0.043507] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>[ 0.043573] Initialize DMAC OK
<6>[ 0.048533] bio: create slab <bio-0> at 0
<5>[ 0.049103] SCSI subsystem initialized
<6>[ 0.049318] usbcore: registered new interface driver usbfs
<6>[ 0.049387] usbcore: registered new interface driver hub
<6>[ 0.049523] usbcore: registered new device driver usb
<6>[ 0.049946] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.050000] Bluetooth: Core ver 2.16
<6>[ 0.050000] NET: Registered protocol family 31
<6>[ 0.050000] Bluetooth: HCI device and connection manager initialized
<6>[ 0.050000] Bluetooth: HCI socket layer initialized
<6>[ 0.050000] Bluetooth: L2CAP socket layer initialized
<6>[ 0.050000] Bluetooth: SCO socket layer initialized
<6>[ 0.050000] cfg80211: Calling CRDA to update world regulatory domain
<7>[ 0.050000] Init eGon pin module V2.0
<6>[ 0.050000] Switching to clocksource aw 64bits couter
<5>[ 0.050000] FS-Cache: Loaded
<6>[ 0.050000] CacheFiles: Loaded
<6>[ 0.050000] Switched to NOHz mode on CPU #0
<7>[ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
<7>[ 0.050000] [sw_hcd0]: usb host driver initialize........
<7>[ 0.050000] [sw_hcd0]: open_usb_clock
<7>[ 0.066562] [sw_hcd0]: host_init_state = 0
<7>[ 0.066571] [sw_hcd0]: platform is usb host
<7>[ 0.066638] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
<6>[ 0.066662] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>[ 0.066679] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
<6>[ 0.067207] hub 1-0:1.0: USB hub found
<6>[ 0.067242] hub 1-0:1.0: 1 port detected
<7>[ 0.067266] wrn: hcd is not enable, need not start hcd
<7>[ 0.067521] [sw_hcd0]: sw_usb_host0_disable start
<7>[ 0.067534] -------sw_hcd0_soft_disconnect---------
<7>[ 0.067545] [sw_hcd_host0]: Set USB Power OFF
<7>[ 0.067556] wrn: hcd is not enable, need not stop hcd
<7>[ 0.067585] [sw_hcd0]: close_usb_clock
<7>[ 0.067627] [sw_hcd0]: sw_usb_host0_disable end
<7>[ 0.067669] [sw_udc]: udc_init: version 20080411
<7>[ 0.067879] axp driver uning configuration failed(539)
<7>[ 0.067898] axp driver uning configuration failed(551)
<6>[ 0.068053] NET: Registered protocol family 2
<6>[ 0.068164] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.068539] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.070665] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.071358] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.071369] TCP reno registered
<6>[ 0.071381] UDP hash table entries: 512 (order: 1, 8192 bytes)
<6>[ 0.071407] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
<6>[ 0.071600] NET: Registered protocol family 1
<6>[ 0.071896] RPC: Registered named UNIX socket transport module.
<6>[ 0.071911] RPC: Registered udp transport module.
<6>[ 0.071920] RPC: Registered tcp transport module.
<6>[ 0.071928] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.072092] Trying to unpack rootfs image as initramfs...
<6>[ 0.156878] Freeing initrd memory: 1804K
<7>[ 0.156991] [pm]aw_pm_init!
<7>[ 0.174499] highmem bounce pool size: 64 pages
<6>[ 0.174758] ashmem: initialized
<5>[ 0.180354] VFS: Disk quotas dquot_6.5.2
<7>[ 0.180511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 0.183633] NTFS driver 2.1.30 [Flags: R/W].
<6>[ 0.184079] fuse init (API version 7.16)
<6>[ 0.184716] msgmni has been set to 860
<4>[ 0.185201] cryptomgr_test used greatest stack depth: 6672 bytes left
<4>[ 0.185632] cryptomgr_test used greatest stack depth: 6480 bytes left
<4>[ 0.187823] cryptomgr_test used greatest stack depth: 6388 bytes left
<4>[ 0.188987] cryptomgr_test used greatest stack depth: 6280 bytes left
<6>[ 0.189462] alg: No test for stdrng (krng)
<6>[ 0.189671] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.189687] io scheduler noop registered
<6>[ 0.189696] io scheduler deadline registered
<6>[ 0.189773] io scheduler cfq registered (default)
<6>[ 0.190525] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>[ 0.192216] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
<6>[ 0.866105] console [ttyS0] enabled
<7>[ 0.870277] G2D: drv_g2d_init
<6>[ 0.873250] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
<6>[ 0.878992] G2D: head:d8000000,tail:d9000000
<6>[ 0.883341] G2D: Module initialized.major:251
<6>[ 0.888277] brd: module loaded
<6>[ 0.893470] loop: module loaded
<7>[ 0.896621] [NAND]nand driver, init.
<7>[ 0.900262] [NAND] nand gpio_request
<7>[ 0.903867] [NAND] nand driver version: 0x2 0x9
<7>[ 0.908497] nand interrupte register ok
<7>[ 0.912355] ret of NFC_ChangMode is 0
<7>[ 0.916100] dma_hdle is 0
<7>[ 0.918894] dma_hdle is 10000008
<7>[ 0.940877] The 0 disk name = bootloader, class name = DISK, disk size = 32768
<7>[ 0.948098] The 1 disk name = env, class name = DISK, disk size = 32768
<7>[ 0.954746] The 2 disk name = boot, class name = DISK, disk size = 65536
<7>[ 0.961462] The 3 disk name = system, class name = DISK, disk size = 524288
<7>[ 0.968418] The 4 disk name = data, class name = DISK, disk size = 4194304
<7>[ 0.975305] The 5 disk name = misc, class name = DISK, disk size = 32768
<7>[ 0.982018] The 6 disk name = recovery, class name = DISK, disk size = 65536
<7>[ 0.989060] The 7 disk name = cache, class name = DISK, disk size = 1048576
<7>[ 0.996035] The 8 disk name = private, class name = DISK, disk size = 32768
<7>[ 1.003014] The 9 disk name = backup, class name = DISK, disk size = 32768
<7>[ 1.009882] The 10 disk name = UDISK, class name = DISK, disk size = 9469952
<7>[ 1.016944] The 10 disk size = 9469952
<7>[ 1.020708] part total count = 11
<6>[ 1.025053] nanda:
<6>[ 1.028326] nandb: unknown partition table
<6>[ 1.033701] nandc: unknown partition table
<6>[ 1.166824] nandd: unknown partition table
<7>[ 1.291945] PHY_PageRead : 777 : ecc limit
<6>[ 1.302831] nande: unknown partition table
<6>[ 1.308516] nandf: unknown partition table
<6>[ 1.314157] nandg: unknown partition table
<6>[ 1.448755] nandh: unknown partition table
<6>[ 1.453939] nandi:
<6>[ 1.457170] nandj: unknown partition table
<6>[ 1.462323] nandk:
<6>[ 1.464589] benn: nand probe enter
<7>[ 1.468025] [NAND]nand driver, ok.
<6>[ 1.471782] PPP generic driver version 2.4.2
<6>[ 1.476252] PPP Deflate Compression module registered
<6>[ 1.481358] PPP BSD Compression module registered
<6>[ 1.489051] PPP MPPE Compression module registered
<6>[ 1.493985] NET: Registered protocol family 24
<6>[ 1.498460] PPTP driver version 0.8.5
<6>[ 1.502528] emac driver is disabled
<6>[ 1.506119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.512770] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<7>[ 1.519065] WRN:L1126(drivers/usb/host/sw_hci_sun4i.c):ERR: usb1 sw-ehci1 is disable
<7>[ 1.526857] WRN:L1134(drivers/usb/host/sw_hci_sun4i.c):ERR: usb1 sw-ohci1 is disable
<7>[ 1.534746] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0875bf8
<7>[ 1.542514] [sw-ehci2]: open clock
<7>[ 1.565877] [sw-ehci2]: Set USB Power ON
<6>[ 1.569803] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.577318] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 2
<6>[ 1.584476] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[ 1.600052] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<6>[ 1.605967] hub 2-0:1.0: USB hub found
<6>[ 1.609736] hub 2-0:1.0: 1 port detected
<7>[ 1.613958] [sw-ehci2]: sw_usb_disable_ehci
<7>[ 1.618143] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0875bf8
<6>[ 1.625995] sw-ehci sw-ehci.2: remove, state 1
<6>[ 1.630465] usb usb2: USB disconnect, device number 1
<6>[ 1.636834] sw-ehci sw-ehci.2: USB bus 2 deregistered
<7>[ 1.641924] [sw-ehci2]: Set USB Power OFF
<7>[ 1.645933] [sw-ehci2]: close clock
<7>[ 1.649559] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0875d08
<7>[ 1.657323] [sw-ohci2]: open clock
<7>[ 1.680700] [sw-ohci2]: Set USB Power ON
<6>[ 1.684621] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.691783] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 2
<6>[ 1.698853] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>[ 1.764449] hub 2-0:1.0: USB hub found
<6>[ 1.768210] hub 2-0:1.0: 1 port detected
<7>[ 1.772401] [sw-ohci2]: sw_usb_disable_ohci
<7>[ 1.776585] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0875d08
<6>[ 1.784437] sw-ohci sw-ohci.2: remove, state 1
<6>[ 1.788884] usb usb2: USB disconnect, device number 1
<6>[ 1.794290] sw-ohci sw-ohci.2: USB bus 2 deregistered
<7>[ 1.799347] [sw-ohci2]: Set USB Power OFF
<7>[ 1.803383] [sw-ohci2]: close clock
<6>[ 1.806917] Initializing USB Mass Storage driver...
<6>[ 1.811922] usbcore: registered new interface driver usb-storage
<6>[ 1.817923] USB Mass Storage support registered.
<6>[ 1.822607] usbcore: registered new interface driver ums-alauda
<6>[ 1.828560] usbcore: registered new interface driver ums-cypress
<6>[ 1.834623] usbcore: registered new interface driver ums-datafab
<6>[ 1.840686] usbcore: registered new interface driver ums_eneub6250
<6>[ 1.846899] usbcore: registered new interface driver ums-freecom
<6>[ 1.852960] usbcore: registered new interface driver ums-isd200
<6>[ 1.858914] usbcore: registered new interface driver ums-jumpshot
<6>[ 1.865058] usbcore: registered new interface driver ums-karma
<6>[ 1.870946] usbcore: registered new interface driver ums-onetouch
<6>[ 1.877083] usbcore: registered new interface driver ums-realtek
<6>[ 1.883146] usbcore: registered new interface driver ums-sddr09
<6>[ 1.889100] usbcore: registered new interface driver ums-sddr55
<6>[ 1.895078] usbcore: registered new interface driver ums-usbat
<6>[ 1.901048] usbcore: registered new interface driver usbserial
<6>[ 1.906877] usbserial: USB Serial Driver core
<6>[ 1.911292] USB Serial support registered for GSM modem (1-port)
<6>[ 1.917400] usbcore: registered new interface driver option
<6>[ 1.922993] option: v0.7.2:USB Driver for GSM modems
<7>[ 1.927985] ------print_msc_config-----
<7>[ 1.931831] vendor_id = 0x18d1
<7>[ 1.935922] mass_storage_id = 0x1
<7>[ 1.939753] adb_id = 0x2
<7>[ 1.943604] usb_manufacturer_name = USB Developer
<7>[ 1.948304] usb_product_name = Android
<7>[ 1.952501] usb_serial_number = 20080411
<7>[ 1.956767] msc_vendor_name = COBY
<7>[ 1.960704] msc_product_name = MID9740
<7>[ 1.964883] msc_release = 100
<7>[ 1.968715] luns = 2
<7>[ 1.972390] ---------------------------
<7>[ 1.976404] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
<7>[ 1.983056] [sw_udc]: alloc request: ep(0xc07a1b68, ep0, 64), req(0xe7be2b00)
<7>[ 1.990225] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
<7>[ 1.998233] [sw_udc]: sw_udc_pullup, is_on = 0
<7>[ 2.002711] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 2.012034] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 2.018911] android_usb gadget: Number of LUNs=2
<6>[ 2.023580] lun0: LUN: removable file: (no medium)
<6>[ 2.028455] lun1: LUN: removable file: (no medium)
<7>[ 2.033362] lun name: lun
<7>[ 2.035988] lun name: lun1
<7>[ 2.038857] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 2.046905] android_usb gadget: android_usb ready
<6>[ 2.051750] mousedev: PS/2 mouse device common for all mice
<6>[ 2.057603] input: sun4i-keyboard as /devices/virtual/input/input0
<7>[ 2.063955] ==register_early_suspend =
<7>[ 2.068175] sunxi RTC version 0.1
<6>[ 2.071765] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
<6>[ 2.078244] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
<7>[ 2.083078]
<7>[ 2.083082]
<7>[ 2.083085] insmod_device_driver
<7>[ 2.083089]
<6>[ 2.090795] sunxi-rtc sunxi-rtc: read time 2010-1-1 14:52:42
<6>[ 2.096663] using rtc device, rtc, for alarms[sw_udc]: sw_usb_device_enable start
<7>[ 2.104201] [sw_udc]: usb_vbase = 0xf1c13000
<7>[ 2.108566] [sw_udc]:
<6>[ 2.110804] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
<6>[ 2.117116] i2c /dev entries driver
<7>[ 2.120631] sram_vbase = 0xf1c00000
<7>[ 2.124128] [sw_udc]: open_usb_clock
<7>[ 2.130138] !!! base_Addr = 0xe88b6c00
<7>[ 2.133993] config i2c gpio with gpio_config api
<7>[ 2.138727] twi0, apb clock = 24000000
<7>[ 2.160914] [sw_udc]: usbd_stop_work
<7>[ 2.164527] [sw_udc]: sw_usb_device_enable end
<6>[ 2.169269] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
<6>[ 2.175701] I2C: i2c-0: AW16XX I2C adapter
<7>[ 2.179796] **********start************
<7>[ 2.183660] 0x40
<7>[ 2.185584] 0xf8
<7>[ 2.187506] 0x28
<7>[ 2.189429] 0x0
<7>[ 2.191285] 0x0
<7>[ 2.193121] **********end************
<7>[ 2.196819] !!! base_Addr = 0xe88b8000
<7>[ 2.200713] twi1, apb clock = 24000000
<6>[ 2.204740] I2C: i2c-1: AW16XX I2C adapter
<7>[ 2.208833] **********start************
<7>[ 2.212695] 0x40
<7>[ 2.214618] 0xf8
<7>[ 2.216541] 0x58
<7>[ 2.218463] 0x0
<7>[ 2.220320] 0x0
<7>[ 2.222158] **********end************
<7>[ 2.225848] !!! base_Addr = 0xe88ba400
<7>[ 2.229713] twi2, apb clock = 24000000
<6>[ 2.233754] I2C: i2c-2: AW16XX I2C adapter
<7>[ 2.237850] **********start************
<7>[ 2.241706] 0x40
<7>[ 2.243629] 0xf8
<7>[ 2.245553] 0x58
<7>[ 2.247476] 0x0
<7>[ 2.249311] 0x0
<7>[ 2.251166] **********end************
<6>[ 2.254953] lirc_dev: IR Remote Control driver registered, major 249
<6>[ 2.261413] IR NEC protocol handler initialized
<6>[ 2.265940] IR RC5(x) protocol handler initialized
<6>[ 2.270747] IR RC6 protocol handler initialized
<6>[ 2.275273] IR JVC protocol handler initialized
<6>[ 2.279799] IR Sony protocol handler initialized
<6>[ 2.284430] IR RC5 (streamzap) protocol handler initialized
<6>[ 2.289997] IR LIRC bridge handler initialized
<6>[ 2.294455] Linux video capture interface: v2.00
<7>[ 2.299093] [cedar dev]: install start!!!
<7>[ 2.303481] [cedar dev]: install end!!!
<7>[ 2.307315] [ace_drv] start!!!
<7>[ 2.310669] [ace_drv] init end!!!
<7>[ 2.313983] [pa_drv] start!!!
<7>[ 2.317202] [pa_drv] init end!!!
<6>[ 2.320576] print_constraints: axp20_ldo1: 1300 mV
<6>[ 2.326425] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>[ 2.334107] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
<6>[ 2.341683] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
<6>[ 2.349321] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1450 mV
<6>[ 2.356995] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
<6>[ 2.364123] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>[ 2.371307] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
<7>[ 2.388374] pmu_pekoff_time = 6000
<7>[ 2.391801] pmu_pekoff_en = 1
<7>[ 2.394765] pmu_peklong_time = 1500
<7>[ 2.398249] pmu_pekon_time = 1000
<7>[ 2.401580] pmu_pwrok_time = 64
<7>[ 2.404717] pmu_pwrnoe_time = 2000
<7>[ 2.408114] pmu_intotp_en = 1
<7>[ 2.411576] [AXP]1837-->0x2
<7>[ 2.414848] POWER20_PEK_SET:1856-->0x9d
<7>[ 2.419160] POWER20_PEK_SET:1867-->0x9d
<7>[ 2.423493] POWER20_PEK_SET:1876-->0x9d
<7>[ 2.427804] POWER20_PEK_SET:1887-->0x9d
<7>[ 2.432135] POWER20_PEK_SET:1899-->0x9d
<7>[ 2.436444] POWER20_HOTOVER_CTL:1908-->0xad
<7>[ 2.447145] Cur_CoulombCounter = 4397
<7>[ 2.450826] last_rest_vol = 32, now_rest_vol = 36
<6>[ 2.459377] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 2.468253] device-mapper: multipath: version 1.3.0 loaded
<6>[ 2.473791] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[ 2.480335] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[ 2.486944] device-mapper: multipath service-time: version 0.2.0 loaded
<6>[ 2.493837] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.498281] Bluetooth: HCI H4 protocol initialized
<6>[ 2.503095] Bluetooth: HCI BCSP protocol initialized
<6>[ 2.508055] Bluetooth: HCILL protocol initialized
<7>[ 2.512997] [wifi]: Select sdio wifi: bcm40181 !!
<7>[ 2.517879] [bcm40181]: exec bcm40181_wifi_gpio_init...
<7>[ 2.523179] [mmc_pm]: SDIO card gpio init is OK !!
<7>[ 2.527997] [mmc]: sunximmc_init
<7>[ 2.531410] [mmc]: sunxi mmc controller using config : 0x9
<7>[ 2.536939] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
<7>[ 2.543400] [mmc]: mmc 0 power off !!
<7>[ 2.547165] [mmc]: mmc0 Probe: base:0xe8914000 irq:32 dma:0 pdes:0xe7044000, ret 0.
<7>[ 2.554859] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
<7>[ 2.561256] [mmc]: mmc 3 power off !!
<7>[ 2.564990] [mmc]: mmc3 Probe: base:0xe8916000 irq:35 dma:0 pdes:0xe7048000, ret 0.
<6>[ 2.573308] usbcore: registered new interface driver usbhid
<6>[ 2.578884] usbhid: USB HID core driver
<6>[ 2.583148] logger: created 256K log 'log_main'
<6>[ 2.587762] logger: created 256K log 'log_events'
<6>[ 2.592606] logger: created 256K log 'log_radio'
<6>[ 2.597315] logger: created 256K log 'log_system'
<7>[ 2.602609] enter sun4i Audio codec!!!
<6>[ 2.607046] sun4i audio support initialized
<7>[ 2.611359] audiocodec_adap_awxx_init: script_parser_fetch err.
<7>[ 2.617492] sun4i Audio codec successfully loaded..
<6>[ 2.623547] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
<6>[ 2.629392] ALSA device list:
<6>[ 2.632401] #0: sun4i-CODEC Audio Codec
<6>[ 2.636493] #1: sun4i-sndhdmi
<6>[ 2.639905] Netfilter messages via NETLINK v0.30.
<6>[ 2.644699] nf_conntrack version 0.5.0 (13025 buckets, 52100 max)
<6>[ 2.651345] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.656658] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 2.663644] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 2.669706] IPv4 over IPv4 tunneling driver
<6>[ 2.674259] GRE over IPv4 demultiplexor driver
<6>[ 2.678527] GRE over IPv4 tunneling driver
<6>[ 2.683367] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.688836] TCP cubic registered
<6>[ 2.692096] Initializing XFRM netlink socket
<6>[ 2.697139] NET: Registered protocol family 10
<6>[ 2.702384] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.707917] IPv6 over IPv4 tunneling driver
<6>[ 2.712891] NET: Registered protocol family 17
<6>[ 2.717371] NET: Registered protocol family 15
<6>[ 2.722005] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.726889] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.732109] Bluetooth: RFCOMM ver 1.11
<6>[ 2.735858] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.741189] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.746411] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.752438] L2TP core driver, V2.0
<6>[ 2.755855] PPPoL2TP kernel driver, V2.0
<6>[ 2.759776] L2TP IP encapsulation support (L2TPv3)
<6>[ 2.764678] L2TP netlink interface
<6>[ 2.768103] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 2.773564] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<7>[ 2.781272] tmp_dcdc2_vol:1450, g_dcdc2_diff:50
<7>[ 2.786144] CPU Freq Min=60000
<7>[ 2.789198] CPU Freq Max=960000
<4>[ 2.793494] [LCD] lcd_module_init
<7>[ 2.797581] LCD SPI doesn't use.
<4>[ 2.800907] [DISP WRN] file:drivers/video/sun4i/disp/de_bsp/de/disp_lcd.c,line:324: fetch script data lcd0_para.lcd_bl_max fail
<7>[ 2.870327] LCD SPI doesn't use.
<7>[ 2.920041] ========== LCD SPI data translation finished ===========
<4>[ 3.456284] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
<4>[ 3.464336] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
<4>[ 3.472363] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
<4>[ 3.480310] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
<4>[ 3.488221] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
<6>[ 3.496219] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
<6>[ 3.501033] sunxi-rtc sunxi-rtc: read time 2010-1-1 14:52:43
<6>[ 3.506707] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 14:52:43 UTC (1262357563)
<6>[ 3.515546] Freeing init memory: 156K
<3>[ 3.521787] init: could not import file '/init.recovery.sun4i.rc' from '/init.rc'
<7>[ 3.540064] [mmc]: mmc 0 detect change, present 1
<3>[ 3.591010] init: cannot open '/initlogo.rle'
<3>[ 3.595959] android_usb: already disabled
<3>[ 3.600561] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 3.610818] android_usb: already disabled
<6>[ 3.615187] adb_bind_config
<7>[ 3.617996] ep_matches, wrn: endpoint already claimed, ep(0xc07a1ba8, 0xe7bdcb80, ep1-bulk)
<6>[ 3.630143] adb_open
<7>[ 3.634623] [sw_udc]: alloc request: ep(0xc07a1be8, ep2-bulk, 512), req(0xe70ab980)
<7>[ 3.634647] [sw_udc]: alloc request: ep(0xc07a1ba8, ep1-bulk, 512), req(0xe70ab9c0)
<7>[ 3.634660] [sw_udc]: alloc request: ep(0xc07a1ba8, ep1-bulk, 512), req(0xe70aba00)
<7>[ 3.634681] [sw_udc]: alloc request: ep(0xc07a1ba8, ep1-bulk, 512), req(0xe70aba40)
<7>[ 3.634693] [sw_udc]: alloc request: ep(0xc07a1ba8, ep1-bulk, 512), req(0xe70aba80)
<7>[ 3.634714] [sw_udc]: sw_udc_pullup, is_on = 1
<7>[ 3.634723] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
<7>[ 3.634734] [sw_udc]: usbd_start_work
<7>[ 3.693085] [sw_udc]: IRQ: suspend
<7>[ 3.693095] [sw_udc]: ERR: usb speed is unkown
<7>[ 3.800068] [sw_udc]: IRQ: reset
<7>[ 3.803324] [sw_udc]: irq: reset happen, throw away all urb
<7>[ 3.840142] [mmc]: mmc 0 power on !!
<7>[ 3.937281] [sw_udc]:
<7>[ 3.939486] +++++++++++++++++++++++++++++++++++++
<7>[ 3.940014] [sw_udc]: usb enter high speed.
<7>[ 3.940014] [sw_udc]:
<7>[ 3.940014] +++++++++++++++++++++++++++++++++++++
<7>[ 3.956026] [sw_udc]: Set address 6
<6>[ 3.980060] android_work: sent uevent USB_STATE=CONNECTED
<4>[ 4.040233] EXT4-fs (nandh): warning: mounting fs with errors, running e2fsck is recommended
<6>[ 4.048977] android_usb gadget: high speed config #1: android
<7>[ 4.050022] [sw_udc]: ep enable: ep1(0xc07a1ba8, ep1-bulk, 128, 512)
<7>[ 4.050022] [sw_udc]: ep enable: ep2(0xc07a1be8, ep2-bulk, 0, 512)
<6>[ 4.067427] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 4.079263] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts:
<2>[ 4.101455] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<3>[ 4.120031] Aborting journal on device nandh-8.
<2>[ 4.124568] EXT4-fs (nandh): Remounting filesystem read-only
<2>[ 4.257741] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<2>[ 4.277766] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<2>[ 4.300044] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<2>[ 4.557266] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<2>[ 4.577283] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<2>[ 4.830357] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<2>[ 4.850887] EXT4-fs error (device nandh): ext4_lookup:1044: inode #2: comm recovery: deleted inode referenced: 16385
<7>[ 6.010837] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
<7>[ 6.018279] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
<7>[ 6.029391] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
<7>[ 6.036743] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
<7>[ 6.044084] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
<7>[ 6.051415] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
<6>[ 6.091696] mmc0: new high speed SDHC card at address 0001
<6>[ 6.097661] mmcblk0: mmc0:0001 00000 7.41 GiB
<6>[ 6.106413] mmcblk0: p1 p2 p3
<7>[ 9.460049] set usbcur 500 mA
<7>[ 9.464246] set usbvol 4000 mV
<4>[ 27.810076] adbd (74): /proc/74/oom_adj is deprecated, please use /proc/74/oom_score_adj instead.
​