This is Android 4.1 / CM10 Rom based on the great PARANOIDANDROID work.
The great advantage of this rom is that it lets you scale every app, just by editing your Apps Dpi & Layout under Settings/Paranoid Settings -> so, no more Google Play problems...
It works on the S7-105 and may work with others 10x...??
Remember this is work-in-progress, so some things don't work as expected (yet?) !!!
( but, depending on use, some may find it is stable enough... )
UPDATE:
PA 2.99 available with some more fixes for the S7-10x series!
Things look good and I can see a 100% working Rom for our S7 in the not so distant future - keep on testing!!!
What you need:
- know how to flash using recovery
- flash the latest recovery
Instructions:
1. get the rom (126Mb)
2. copy the file to the internal SD
3. boot to recovery and do a Backup and a full Wipe Data
*** YOU NEED TO FULLWIPE IF YOU WERE USING ANOTHER ROM BEFORE
4. select 'Install zip from sdcard', choose the zip and flash
5. install Gapps (optional)
5. do Wipe Cache Partition
6. do Advanced/Wipe Dalvik Cache
7. reboot and wait 3-4 minutes...
Work:
1. capacitive touchscreen
2. wifi
3. bluetooth (only tested obex file transfer)
3. phone
4. tablet mode enabled by default
5. ...almost everything else ;-)
6. skype (audio works, use headphones!), youTube, etc...
Does not work:
1. bluetooth audio, etc..??
2. cameras (may work, source code is available, just needs compile)
3. tethering (see Tips) (may work someday...)
4. netflix, flash, ...?? (streaming video in general...?)
5. some sound noises (problem is in libs/configs, not kernel ??)
6. wifi disconnects on stand-by...???
NOTE:
This Rom does not need Links2SD or Apps2SD, it automatically uses a 2º partition (sd-ext) on the internal 8Gb SD for the Data partition, so you may be able to install lots of apps!
So, if you experience problems with internal Sdcard, try re-partition in two, like 7+1, for example.
TIPS & TRICKS:
-> wifi tether may work:
Install from the market app WiFi tether, then go to settings and check MSS clamping and Ruting fix. Then click on Change Device-Profile and check Generic ICS/JB (wlan1) and finally click on Change Setup-Method and click on WEXT. Probably there is no need to do all of this but after one hour playing with this I can finally use hot spot. (tip by member Just_me)
-> latest Google Apps:
recommended gapps-jb-20121011 (install from recovery)
-> small performance gain:
Disable CPU Rendering
-> updated drivers (V3):
Adreno graphics drivers
Enjoy!!
Suggestions are welcome!!
This is possible thanks to the work of ere95588, asturel, goodoane, angelsgroup and probably others..??
The great advantage of this rom is that it lets you scale every app, just by editing your Apps Dpi & Layout under Settings/Paranoid Settings -> so, no more Google Play problems...
It works on the S7-105 and may work with others 10x...??
Remember this is work-in-progress, so some things don't work as expected (yet?) !!!
( but, depending on use, some may find it is stable enough... )
UPDATE:
PA 2.99 available with some more fixes for the S7-10x series!
Things look good and I can see a 100% working Rom for our S7 in the not so distant future - keep on testing!!!
What you need:
- know how to flash using recovery
- flash the latest recovery
Instructions:
1. get the rom (126Mb)
2. copy the file to the internal SD
3. boot to recovery and do a Backup and a full Wipe Data
*** YOU NEED TO FULLWIPE IF YOU WERE USING ANOTHER ROM BEFORE
4. select 'Install zip from sdcard', choose the zip and flash
5. install Gapps (optional)
5. do Wipe Cache Partition
6. do Advanced/Wipe Dalvik Cache
7. reboot and wait 3-4 minutes...
Work:
1. capacitive touchscreen
2. wifi
3. bluetooth (only tested obex file transfer)
3. phone
4. tablet mode enabled by default
5. ...almost everything else ;-)
6. skype (audio works, use headphones!), youTube, etc...
Does not work:
1. bluetooth audio, etc..??
2. cameras (may work, source code is available, just needs compile)
3. tethering (see Tips) (may work someday...)
4. netflix, flash, ...?? (streaming video in general...?)
5. some sound noises (problem is in libs/configs, not kernel ??)
6. wifi disconnects on stand-by...???
NOTE:
This Rom does not need Links2SD or Apps2SD, it automatically uses a 2º partition (sd-ext) on the internal 8Gb SD for the Data partition, so you may be able to install lots of apps!
So, if you experience problems with internal Sdcard, try re-partition in two, like 7+1, for example.
TIPS & TRICKS:
-> wifi tether may work:
Install from the market app WiFi tether, then go to settings and check MSS clamping and Ruting fix. Then click on Change Device-Profile and check Generic ICS/JB (wlan1) and finally click on Change Setup-Method and click on WEXT. Probably there is no need to do all of this but after one hour playing with this I can finally use hot spot. (tip by member Just_me)
-> latest Google Apps:
recommended gapps-jb-20121011 (install from recovery)
-> small performance gain:
Disable CPU Rendering
-> updated drivers (V3):
Adreno graphics drivers
Enjoy!!
Suggestions are welcome!!
This is possible thanks to the work of ere95588, asturel, goodoane, angelsgroup and probably others..??
Last edited: