About a few days ago, we introduced that there will be a 7 inch quad core tablet PC that uses Allwinner A31 chip, the ICOO ICOU7GT. Fortunately, the manufacturer provided us there prototype machine this morning. At the first time we got this tablet, we did some tests on it. Coming next, lets take a view on this first A31 quad core 7 inch tablet.
Here is the brief specs on it.
Trough the specs, we know its a high quipped tablet. It has the same IPS screen with the same resolution of Ainol Venus. But it equipped with the more powerful A31 chip. And its thickness is more thinner. Rear camera has been updated to higher 5.0MP camera.
Weve already shown you the pictures of ICOU7GT, while the pictures were in whole view, since we got the real item. We took some pictures in details, more clearly and more precise.
The front of ICOU7GT, looks like a huge mobile phone.
Back shell of it, frosted finish aluminum shell provide a better touch feeling.
In the front, it equipped with a speaker and a 0.3MP camera, by the side the speaker, we can find the proximity sensor and the light sensor. The mold is 3G version mold, but what we got is a wifi version ICOU7GT. So the speaker and proximity sensor, light sensor actually did not work during the test.
The back camera is 5.0MP, the white lid is set up for enhance the 3G signal reception. Of course, this is a wifi version, so theres no antenna under the white lid.
I/O of ICOU7GT, as we can see that this tablet uses a micro HDMI port for video output. The charging port is the micro USB port, this will makes the charging more convenient.
Dimension of ICOU7GT, 115x192x9.5mm, its very compact.
After view on the appearance pictures. Lets remove the back shell and explore whats inside this small device.
ICOU7GT applies with a blue PCB, the battery takes almost a half space.
The texture on the back shell is very clear, it has the same surface of iPad. On the left upper position, it is the SIM card slot hole.
We can easily find the CPU of this tablet, the die size of it is a little bit bigger than the RAM chip next to it.
On the left and top of the main processor are 2x 4GB NAND FLASH from Micron, the retail version will add two more 4GB NAND FLASH to increase the storage capacity to 16GB. On the bottom side and right lays 8x Hynix 256MB RAM chips.
The wireless network module of ICOU7GT, Realtek RTL8188, it supports 150Mbps connection.
This is the rear 5.0MP camera.
AXP221 power management IC also from Allwinner, it provides a better compatibility with the A31 processor.
The chip on the left is ZEITEC 6221 touch controller, it supports max. 40 inch touch panel and 5 points multi-touch. The blue part on the right is the vibration motor.
I/O parts, from left to right are micro SD card slot, micro USB/OTG port, micro HDMI port and 3.5mm earphone port.
What you guys think of the material and components of ICOU7GT. Must be excited. Back to the topic, lets reassemble it, power on and operate this tab.
The power up time is very short, merely about 10 seconds. After unlock the screen, the concise desktop reveal to us.
Apps drawer, google Play Store is installed and theres Update app for OTA firmware update. Just copy the latest firmware into your micro SD card and update from the OTA update app.
ICOU7GT supports 150Mbps wifi connection and 5 point multi-touch.
Above are all languages in this tablet, most languages are included.
Here is the brief specs on it.
Operating system | Android 4.1.1 |
Screen type | IPS capacitive touch screen |
Screen size | 7 inch |
Resolution | 1280*800 |
CPU | Allwinner A31 quad core 1.2GHz |
RAM | 2GB |
ROM | 16GB |
Camera | Front 0.3MP; rear 5.0MP |
Card extend | Max. 32GB Micro SD |
Dimension | 190*115*9.5mm |
Net weight | 305g |
Battery capacity | 3600mAh |
Weve already shown you the pictures of ICOU7GT, while the pictures were in whole view, since we got the real item. We took some pictures in details, more clearly and more precise.
The front of ICOU7GT, looks like a huge mobile phone.
Back shell of it, frosted finish aluminum shell provide a better touch feeling.
In the front, it equipped with a speaker and a 0.3MP camera, by the side the speaker, we can find the proximity sensor and the light sensor. The mold is 3G version mold, but what we got is a wifi version ICOU7GT. So the speaker and proximity sensor, light sensor actually did not work during the test.
The back camera is 5.0MP, the white lid is set up for enhance the 3G signal reception. Of course, this is a wifi version, so theres no antenna under the white lid.
I/O of ICOU7GT, as we can see that this tablet uses a micro HDMI port for video output. The charging port is the micro USB port, this will makes the charging more convenient.
Dimension of ICOU7GT, 115x192x9.5mm, its very compact.
After view on the appearance pictures. Lets remove the back shell and explore whats inside this small device.
ICOU7GT applies with a blue PCB, the battery takes almost a half space.
The texture on the back shell is very clear, it has the same surface of iPad. On the left upper position, it is the SIM card slot hole.
We can easily find the CPU of this tablet, the die size of it is a little bit bigger than the RAM chip next to it.
On the left and top of the main processor are 2x 4GB NAND FLASH from Micron, the retail version will add two more 4GB NAND FLASH to increase the storage capacity to 16GB. On the bottom side and right lays 8x Hynix 256MB RAM chips.
The wireless network module of ICOU7GT, Realtek RTL8188, it supports 150Mbps connection.
This is the rear 5.0MP camera.
AXP221 power management IC also from Allwinner, it provides a better compatibility with the A31 processor.
The chip on the left is ZEITEC 6221 touch controller, it supports max. 40 inch touch panel and 5 points multi-touch. The blue part on the right is the vibration motor.
I/O parts, from left to right are micro SD card slot, micro USB/OTG port, micro HDMI port and 3.5mm earphone port.
What you guys think of the material and components of ICOU7GT. Must be excited. Back to the topic, lets reassemble it, power on and operate this tab.
The power up time is very short, merely about 10 seconds. After unlock the screen, the concise desktop reveal to us.
Apps drawer, google Play Store is installed and theres Update app for OTA firmware update. Just copy the latest firmware into your micro SD card and update from the OTA update app.
ICOU7GT supports 150Mbps wifi connection and 5 point multi-touch.
Above are all languages in this tablet, most languages are included.
Last edited: