Unoffical CM9 ported from Christian Troy For CMP741E with gt811 LCD

[agk4444]

************************************
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR TABLET IN ANY WAY.
************************************
Before I get started I recommend you make a NANDROID of your CMP741E (with the Original firmware).
Once your in CWM you can do a Nandroid Backup
************************************************** *************

This zip file only works for CMP741E that has gt811 LCD

http://d-h.st/sGe for gt811

http://d-h.st/uxY works for all CMP741E's

http://goo.im/gapps/gapps-ics-20120429-signed.zip

Looks like everything.

Please let me know if you run into any problems.

Thanks to Christian Troy for CM9 port for Allwinner

Thanks to Mastermind278 for CMP741e dump

 

[jholt5638]

just wanted pass along that this does work with the zet6221 if manually load the module, I attempted to modify the boot.im to load both but just boots to a black screen

 

[mastermind278]

Your Dropbox link keeps having too much traffic and being blocked.

Hope you don't mind but I uploaded it to dev-host:
http://d-h.st/sGe


Also Gapps can be found here: http://goo.im/gapps/gapps-ics-20120429-signed.zip

 

[agk4444]

Thanks mastermind for uploading the links

 

[mastermind278]

Thanks mastermind for uploading the links

Just wanted to let you know on 2/15 the CMP741E is not going to sleep, so battery life is LOW... the tablet isn't going to sleep and just stay's on AWAKE.

 

[t0mmyr]

do we need to flash gapps too? also does this have any built in recovery that we can reboot into? any hardware combo keys for recovery? oh and thank u!!

 

[agk4444]

Just wanted to let you know on 2/15 the CMP741E is not going to sleep, so battery life is LOW... the tablet isn't going to sleep and just stay's on AWAKE.

Sorry for late reply,I will look into it. Do you have any ideas where to start? and Let me know if you come up with any others issues. Thanks for the help.

Can you change WiFi sleep policy to "Never". See if this helps anything.

 

[agk4444]

do we need to flash gapps too? also does this have any built in recovery that we can reboot into? any hardware combo keys for recovery? oh and thank u!!

Yes you need to flash gapps too. No this doesn't have built in recovery yet. I will try to work on it.

 

[agk4444]

just wanted pass along that this does work with the zet6221 if manually load the module, I attempted to modify the boot.im to load both but just boots to a black screen

Can you try this and let me know if it is working,I don't have a zet6221

Dev-Host - cm9_cmp741e_20130218-signed.zip - The Ultimate Free File Hosting / File Sharing Service

 

[pug_ster]

Ummm, how can I tell if the tablet has an gt811 lcd? Thanks.

 

[agk4444]

Ummm, how can I tell if the tablet has an gt811 lcd? Thanks.

use rootexplorer or any app that lets you view system files and open file named init.sun4i.rc look under touchscreen drivers

 

[c19932]

Thank yiu so much for the port. From my precious calculation, this rom is 9.45 million times better than the stock rom. Hopefully u could port cm10 some time in the future too

 

[wfg97079]

Thanks for this. Is there a good how to guide for backup of existing system and install of this CM9 port?

************************************
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR TABLET IN ANY WAY.
************************************
Before I get started I recommend you make a NANDROID of your CMP741E (with the Original firmware).
Once your in CWM you can do a Nandroid Backup
************************************************** *************

This zip file only works for CMP741E that has gt811 LCD

Dev-Host - cm9_cmp741e_20130215-signed.zip - The Ultimate Free File Hosting / File Sharing Service

Goo.im Downloads - Downloading gapps-ics-20120429-signed.zip

Looks like everything.

Please let me know if you run into any problems.

Thanks to Christian Troy for CM9 port for Allwinner

Thanks to Mastermind278 for CMP741e dump

 

[datnguyen]

Dear akg444
Thanks for your works.
But I have a stupid question (I'm new bie in tablet!!)
I will unzip this file and copy them to miniDS card and insert+Power on to flash???
If wrong, please give me link to research how to re-flash with this image ROM
Hope you help me soon!!!

 

[highroller]

What is the best and easiest way to install this rom? Step by step guide would be great.

It seems that you are also working on cm10 port, I am looking forward to it. Thanks for your effort.