Flytouch II - another variant?

cherry314159

Member
Jul 13, 2011
1
0
I have a FT II with 512MB of RAM, 4GB of flash, and 2 TF slots as
well as the other standard connectors (RJ45, 2xUSB, HDMI).
The OS is android 2.1 although the box claims android 2.2.

Question: is it possible to upgrade to 2.2 (or higher)?
If so, which ROM image to use?

Here's the device information:
Model number: JCB1001
Firmware version: JCB 2.2
Kernel version: 2.6.32.9 lwf@lwf-desktop#24 dated MON May 30 16:29:16 CST 2011
Build number JCB-2.2.0518

boot message (lower right): 0.6.1.5()


# cat cpuinfo
Processor : ARMv6-compatible processor rev 5 (v6l)
BogoMIPS : 789.70
Features : swp half thumb fastmult vfp edsp java
CPU implementer : 0x41
CPU architecture: 6TEJ
CPU variant : 0x1
CPU part : 0xb36
CPU revision : 5


Hardware : WOODY
Revision : 0004
Serial : 0000000000000000
# cat /proc/mtd
dev: size erasesize name
mtd0: 00600000 00200000 "kernel"
mtd1: 00200000 00200000 "ramdisk"
mtd2: 08000000 00200000 "resv"
mtd3: 11800000 00200000 "system"
mtd4: 61a00000 00200000 "userdata"
mtd5: 02e00000 00200000 "wowconfig"
mtd6: 04000000 00200000 "cache"
mtd7: 78e00000 00200000 "local"
mtd8: 00100000 00200000 "panic"
 
Have same issue
Leaderpad 2.2

Modelnr JCB001
Firmware
JCB 2.2
Kernel versie
2.6.32.9
blds@emma #1
Fri may 27 14:36:55 CST 2011-08-20

Boot 6.1.5.()

I bricked it by trying te reflash, but got confused by different instructions in russian (do not speak russian at all). Any help would be welcome.
 
G'day cherry314159,
I appear to have exactly the same model!
I would also like to upgrade to Android 2.3.4 or higher so that I can connect to an Arduino host.
Did you have any success with your upgrade?
I would really appreciate any help.
Have you discovered the manufacturer's wrbsite, or any other reliable source of updates?
Regards, mccer

Hi Buurtbuzz,
My touch screen does not work.
If you cannot get yours going again, would you consider selling it to me so I can use the touch screen?

Thanks, mccer
 
Back
Top