Littles problems with my Wowpad...

[fluorex]

Hi all, i'm a newbie on this forum and on the android world.

So, I think there're problems with my Wowpad, it seems like it : but the console menu don't come with me...
My problems are :
- The system update doesn't work : it says please check network all the time.
- I can't find the drivers; when I try to connect it on computer with a male/male USB, I detect an unknown device.
- There's sometime an error message which says there is a sudden closure of this application, like iDisplay.

Informations of my pad :

Firmware version : 2.1-update 1
Kernel version : 2.6.32.9 hzhao@emma //1
Build number : deb-r2.1.1001

Thanx for reading, I have seach everywhere but I found nothing

PS : Sorry for my english, I'm french, answer me anyway please

Bye...

 

[Campaman]

From my experience the system update tool does not work until you get newer firmware, your best option would be to try the bootable SD card option, try this post http://www.androidtablets.net/forum...795-how-manually-update-requires-sd-card.html

 

[fluorex]

Thank you for your response, I have tried your post but it's only works for 1170 and above and i'm 1001 Isn't it ?

 

[fluorex]

help me please

 

[sharpe351]

You have to update your firmware first. You cannot flash a different ROM without flashing a new uboot nand first.

Sent from a SuperPAD via Tapatalk

 

[fluorex]

Yes, I know that my problem is to upgrade but I don't know how. You says I need to flash a new uboot nand, what is it ?
Sorry for my question is probably stupid.

 

[sharpe351]

Yes, I know that my problem is to upgrade but I don't know how. You says I need to flash a new uboot nand, what is it ?
Sorry for my question is probably stupid.

No stupid questions here!
Look in the thread for ROM #3925... they show you a step by step installation of a new firmware and U0 files to your tablet. The process is pretty simple. Rgocal and I are working on making it a whole lot easier. Just problems with the final details.

*note* make absolutly sure that you check and double check that you have the correct firmware. Cfrockit has a listing of the uboots that are compatible with what tablet.

Sent from a SuperPAD via Tapatalk

 

[fluorex]

Ok.. I think I see what your say, do you think http://www.androidtablets.net/forum/gome-flytouch-ii-firmware/16530-rom-guide-superpad-flytouch2-wwe10-android-2-2-v2-1-3925-usb-flashing.html
is the good guide for me please ? I don't want to destruct my tablett, so...
Thank for your precious help !!

 

[sharpe351]

Ok.. I think I see what your say, do you think http://www.androidtablets.net/forum/gome-flytouch-ii-firmware/16530-rom-guide-superpad-flytouch2-wwe10-android-2-2-v2-1-3925-usb-flashing.html
is the good guide for me please ? I don't want to destruct my tablett, so...
Thank for your precious help !!

Yes. Try that first. If it doesn't take use the stragulus 2 pass method.

Sent from my LG OP V using Tapatalk

 

[fluorex]

Ok, I have try the guide but the "otg drivers" don't work on my W7 64bits and on my virtual xp when I try to flash V2852, it blocks to 0% but drivers work perfectly.
Have you got any solution for me or it's finish for me ?
Thank you

 

[sharpe351]

Ok, I have try the guide but the "otg drivers" don't work on my W7 64bits and on my virtual xp when I try to flash V2852, it blocks to 0% but drivers work perfectly.
Have you got any solution for me or it's finish for me ?
Thank you

There are alot of issues when using 64bit systems to do anything with superpads. Unfortunately, I do not own one, so I cannot help you there.

Sent from my LG OP V using Tapatalk