[ROM] ViewCOMB 3.2 - Honeycomb 3.2 for ViewPad 10s

[Uziel]

So i hope someone could help me.

I hat the viwcomb reinstalt and erverything worked fine. But today i came home from work and the wifi didnt work. When i aktivate it in the settings it goes straight of and said "error" and nothing worket. For about four days i had the same problem. I would like to know what this could be and how i can fix it. Because a tablet wihtout wifi is not so great.

I will reinstall the system now again.... But this can´t be the right when i must reinstall it every few days.

 

[Ricorocks]

Hi. I don't have any questions problems or anything amazing to post. I just wanted to say thank you. Every time I turn on my tablet it makes me smile! Thanks for the work L.

 

[chemi]

Wi-Fi and 3G get the same problem



Tablet PC 10.2 Inch Cortex A9 Android 4.0 Update HDMI 8GB

 

[ejatz7]

Hi, I'm a newbie here. Last night I was able to flash viewcomb build 7.2. Initially I rooted the device using z4root and everthing went very smooth. After a while, I messed up with z4root where I install the program in viewcomb and try to unroot. Now my Viewpad cant be rooted. No wifis, no usb's and not even reverse back to original stock rom. Could somebody help me with this problem. thanks in advance.

 

[AndroidMcHaggis]

Hi, I'm a newbie here. Last night I was able to flash viewcomb build 7.2. Initially I rooted the device using z4root and everthing went very smooth. After a while, I messed up with z4root where I install the program in viewcomb and try to unroot. Now my Viewpad cant be rooted. No wifis, no usb's and not even reverse back to original stock rom. Could somebody help me with this problem. thanks in advance.

WHY did you root ?, rom needs no rooting

 

[jaysin]

Can someone please help.

I have done the upgrade to 7.2 all works great, or so I thought.
I bought the dock and use it in the dock most the time, but was at my girlfriends place at the weekend and the usb on the tablet is not working (it did with 2.2 OS)
The USBs on the dock DO work though.
I cant work this one out but can anyone shed light on this?

Thanks

P.S.
The USB worked to flash it obviously.

Open the Shuttle tools app and hit the button that will set usb mode to host instead of peripheral

 

[jaysin]

So i hope someone could help me.

I hat the viwcomb reinstalt and erverything worked fine. But today i came home from work and the wifi didnt work. When i aktivate it in the settings it goes straight of and said "error" and nothing worket. For about four days i had the same problem. I would like to know what this could be and how i can fix it. Because a tablet wihtout wifi is not so great.

I will reinstall the system now again.... But this can´t be the right when i must reinstall it every few days.

Like most problems this one can be resolved by turning it off and on again. Hold down the power button for 10 seconds, or hit the power button and choose reboot.

 

[fazlinuz]

All of a sudden my viewpad 10s won't boot. I managed to get it into nvflash mode but when I try to reload the viewcomb 3.2 build 7.2, I get the following:

Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x0270308341df64d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 11 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
3 (0x3) flags: 0

By there way, i'm still can connect to pc through " Nvidia Boot Recovery,...." , but when try nvflash mode again, the same problem still exist.
is it brick my viewpad 10s ?
Is there anything I can do to solve this problems.

 

[elf69]

Open the Shuttle tools app and hit the button that will set usb mode to host instead of peripheral

Thank you, feel like such an idiot!

 

[liquidcat]

All of a sudden my viewpad 10s won't boot. I managed to get it into nvflash mode but when I try to reload the viewcomb 3.2 build 7.2, I get the following:

Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x0270308341df64d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 11 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
3 (0x3) flags: 0

By there way, i'm still can connect to pc through " Nvidia Boot Recovery,...." , but when try nvflash mode again, the same problem still exist.
is it brick my viewpad 10s ?
Is there anything I can do to solve this problems.

It looks bad. Try flashing another rom.

 

[Uziel]

Like most problems this one can be resolved by turning it off and on again. Hold down the power button for 10 seconds, or hit the power button and choose reboot.

So i tried this. But after a reboot wifi is still not working. When the tab is rebooting its take now longer and the screen were it says please waiting apears two times... And sometimes when the tab is restartet and on the unlock screen its reboots from self.
But the problem with the wifi is still not solved.

In the last time i had tryed the VegaComb Rom and a new installed ViewComb both Roms had this problem after a few days of use....

So any othe hints what it could be?

 

[fazlinuz]

It looks bad. Try flashing another rom.

Thanks for idea.. i was try with few rom like :
1) Stock Rom V1.11
2) Vegacomb Installer
3) Viewcomb build 6.3

I'm also been trying flash recovery with Clockwork recovery ,Vegafixer

but the problem still same.

Anyone have idea to solve it

 

[liquidcat]

So i tried this. But after a reboot wifi is still not working. When the tab is rebooting its take now longer and the screen were it says please waiting apears two times... And sometimes when the tab is restartet and on the unlock screen its reboots from self.
But the problem with the wifi is still not solved.

In the last time i had tryed the VegaComb Rom and a new installed ViewComb both Roms had this problem after a few days of use....

So any othe hints what it could be?

Did you format your sd card?

 

[Legionnaire]

Thanks for idea.. i was try with few rom like :
1) Stock Rom V1.11
2) Vegacomb Installer
3) Viewcomb build 6.3

I'm also been trying flash recovery with Clockwork recovery ,Vegafixer

but the problem still same.

Anyone have idea to solve it

All mentioned ROMs are OK. Check your device.

 

[Uziel]

Did you format your sd card?

Yes i did format my sd card.

So next try..
1st formate sd card
2nd back to stock rom
3rd viewcomb installer to install 7.2

and now waiting an hoping that the wifi dont mess up again.